Difference between revisions of "TOBRIT Shopping List"
| Line 2: | Line 2: | ||
TOOLS<BR> | TOOLS<BR> | ||
- 10’ tall scaffolding with platform and wheels [https://www.scaffoldmart.com/scaffolding-biljax-style-standard-5ft-5ft-set-with-7ft-brace.html?category_id=296 Scaffoldmart]<BR> | - 10’ tall scaffolding with platform and wheels (Possibly from [https://www.scaffoldmart.com/scaffolding-biljax-style-standard-5ft-5ft-set-with-7ft-brace.html?category_id=296 Scaffoldmart])<BR> | ||
- [https://www.homedepot.com/p/RYOBI-10-in-Drill-Press-with-EXACTLINE-Laser-Alignment-System-DP103L/205503636 Drill Press]<BR> | - [https://www.homedepot.com/p/RYOBI-10-in-Drill-Press-with-EXACTLINE-Laser-Alignment-System-DP103L/205503636 Drill Press]<BR> | ||
- (6) [https://www.homedepot.com/p/Hilti-1-2-in-x-6-in-High-Speed-Wood-Spade-Bits-3-Piece-2025586/204514437 1/2” Wood Space Bit]<BR> | - (6) [https://www.homedepot.com/p/Hilti-1-2-in-x-6-in-High-Speed-Wood-Spade-Bits-3-Piece-2025586/204514437 1/2” Wood Space Bit]<BR> | ||
Revision as of 23:49, 23 June 2019
TOBRIT Shopping List
TOOLS
- 10’ tall scaffolding with platform and wheels (Possibly from Scaffoldmart)
- Drill Press
- (6) 1/2” Wood Space Bit
- (8) 1/2” Wrench or ratcheting
WOOD Purgatory
- (14) 2x10 x20’ kiln dried stud (main members and floor beams)
- (32) 2x8 x16’ kiln dried stud (side member reinforcement and floor frame)
- (15) 2x4 x10’ kiln dried stud (floor)
- (40) 2x4 x8’ kiln dried stud (steps and wall frame)
- (12) 2x6 x8’ kiln dried stud (steps)
- (5) 48x96 3/4” plywood board (floor)
- (50) 48x96 1/2” plywood board (walls)
WOOD other octahedra
- (350) 2x4 x96” kiln dried stud (24 8’ OH + 7 4’ OH)
- (5) 2x4 x192” kiln dried stud (spire)
HARDWARE Purgatory
- (6) 20’ OH Simas Connector
- (4) Simas con. add-on for equator steel wire guide and double ground anchor steel wire
- (10) Tie Plate to connect Purgatory floor beams to 20’ OH (or use wood (1/2” ply triangles?) instead. TBD by engineer)
- (3) Joist Hanger for Purgatory 2x10 floor beam cross
- (100) 1/2 in. x 4” Hex Bolt
- (12) 1/2 in. x 8” Hex Bolt (to anchor steel U for Ark Steel Wire Rope to 2x10 studs)
- (100) 1/2 in. x 6” Hex Bolt (to connect 2x8 to 2x10 studs)
- (200) 1/2 in. Washer
- (200) 1/2 in. Hex Nut
- (320’) 1/4” Wire Rope (equator loop, floor loop, 8 ground anchors)
- (100) 1/4 in. Wire Cable Clamp
- (50) 1/4 in. Wire Rope Thimble
- (15) 1/4 in. Turnbuckle
HARDWARE Ark
- (TBD) 1/4” Wire Rope
- (8) 1/4” pulley (connects Ark’s D rings to steel cable)
- (8) Quick Link (to connect pulley to Ark anchor points)
- (28) 1/4 in. Wire Cable Clamp
- (15) 1/4 in. Wire Rope Thimble
- (8) 1/4 in. Turnbuckle
