TOBRIT Shopping List

TOBRIT Shopping List

TOOLS
- [ ] 10’ tall scaffolding with platform and wheels
- [ ] Drill press - [ ] (6) 1/2” wood bit - [ ] (10) 1/2” key

WOOD Purgatory - [ ] (14) 2x10 x20’ kiln dried stud (main members and floor beams) - [ ] (32) 2x8 x16’ kiln dried stud (side member reinforcement and floor frame) - [ ] (15) 2x4 x10’ kiln dried stud (floor) - [ ] (40) 2x4 x8’ kiln dried stud (steps and wall frame) - [ ] (12) 2x6 x8’ kiln dried stud (steps) - [ ] (5) 48x96 3/4” plywood board (floor) - [ ] (50) 48x96 1/2” plywood board (walls)

WOOD other octahedra - [ ] (350) 2x4 x96” kiln dried stud (24 8’ OH + 7 4’ OH) - [ ] (5) 2x4 x192” kiln dried stud (spire)

HARDWARE Purgatory - [ ] (6) 20’ OH Simas Connector - [ ] (4) Simas con. add-on for equator cable guide and double ground anchor cable - [ ] (10) metal plates to connect Purgatory floor beams to 20’ OH (or use wood (1/2” ply triangles?) instead. TBD by engineer) - [ ] (3) U carpentry metal connector for Purgatory 2x10 floor beam cross - [ ] (100) 1/2 in. 4” long bolt - [ ] (12) 1/2 in. 8” long bolt (to anchor steel U for Ark steel cables to 2x10 studs) - [ ] (100) 1/2 in. 5 1/2” or 6” bolt (to connect 2x8 to 2x10 studs - [ ] (200) 1/2 in. Washer - [ ] (200) 1/2 in. Nut - [ ] (320’) 1/4 in. Steel cable (equator loop, floor loop, 8 ground anchors) - [ ] (100) 1/4 in. Cable connector - [ ] (50) 1/4 in. Cable loop protector - [ ] (15) 1/4 in. Cable tensor

HARDWARE Ark - [ ] (TBD) 1/4” steel cable - [ ] (8) 1/4” pulley (connects Ark’s D rings to steel cable) - [ ] (28) 1/4 in. Cable connector - [ ] (15) 1/4 in. Cable loop protector - [ ] (8) 1/4 in. Cable tensor