Difference between revisions of "TOBRIT Shopping List"
| Line 13: | Line 13: | ||
==WOOD Purgatory== | ==WOOD Purgatory== | ||
- (14) 2x10 x20’ kiln dried stud (main members and floor beams)<BR> | - (14) 2x10 x20’ kiln dried stud (main members and floor beams)<BR> | ||
- ( | - (26) 2x8 x16’ kiln dried stud (main member sides)<BR> | ||
- ( | - (115) 2x4 x8’ kiln dried stud (walls frame)<BR> | ||
- ( | - (300) 2x4 x8’ kiln dried stud (burn teepees)<BR> | ||
- ( | - (8) 2x10 x12’ kiln dried stud (floor frame)<BR> | ||
- ( | - (9) 2x8 x12’ kiln dried stud (floor joists)<BR> | ||
- ( | - (6) 2x8 x8’ kiln dried stud (steps for ladder)<BR> | ||
- (4) 2x8 x10’ kiln dried stud (steps for ladder)<BR> | |||
- (55) 48x96 1/2” plywood board (wall sheathing and plywood flooring)<BR> | |||
==WOOD other octahedra== | ==WOOD other octahedra== | ||
Revision as of 23:00, 25 July 2019
TOBRIT Shopping List
TOOLS
- 10’ tall scaffolding with platform and wheels (Possibly from Scaffoldmart)
- Drill Press
- (6) 1/2” Wood Space Bit
- (8) 1/2” Wrench or ratcheting
- (1) Table saw
- (2) Harness
- (2) Internal shock lanyard
- (2) Safety helmet
WOOD Purgatory
- (14) 2x10 x20’ kiln dried stud (main members and floor beams)
- (26) 2x8 x16’ kiln dried stud (main member sides)
- (115) 2x4 x8’ kiln dried stud (walls frame)
- (300) 2x4 x8’ kiln dried stud (burn teepees)
- (8) 2x10 x12’ kiln dried stud (floor frame)
- (9) 2x8 x12’ kiln dried stud (floor joists)
- (6) 2x8 x8’ kiln dried stud (steps for ladder)
- (4) 2x8 x10’ kiln dried stud (steps for ladder)
- (55) 48x96 1/2” plywood board (wall sheathing and plywood flooring)
WOOD other octahedra
- (350) 2x4 x96” kiln dried stud (24 8’ OH + 7 4’ OH)
- (5) 2x4 x192” kiln dried stud (spire)
HARDWARE Purgatory
- (6) 20’ OH Simas Connector
- (10) Tie Plate to connect Purgatory floor beams to 20’ OH (or use wood (1/2” ply triangles?) instead. TBD by engineer)
- (3) Joist Hanger for Purgatory 2x10 floor beam cross
- (100) 1/2 in. x 4” Hex Bolt
- (12) 1/2 in. x 8” Hex Bolt (to anchor steel U for Ark Steel Wire Rope to 2x10 studs)
- (100) 1/2 in. x 6” Hex Bolt (to connect 2x8 to 2x10 studs)
- (200) 1/2 in. Washer
- (200) 1/2 in. Hex Nut
- (320’) 1/4” Wire Rope (equator loop, floor loop, 8 ground anchors)
- (100) 1/4 in. Wire Cable Clamp
- (50) 1/4 in. Wire Rope Thimble
- (15) 1/4 in. Turnbuckle
HARDWARE Ark
- (TBD) 1/4” Wire Rope
- (8) 1/4” pulley (connects Ark’s D rings to steel cable)
- (8) Quick Link (to connect pulley to Ark anchor points)
- (28) 1/4 in. Wire Cable Clamp
- (15) 1/4 in. Wire Rope Thimble
- (8) 1/4 in. Turnbuckle
