Difference between revisions of "TOBRIT Shopping List"
(Created page with "TOBRIT Shopping List<BR> TOOLS<BR> - [ ] 10’ tall scaffolding with platform and wheels<BR> - [ ] Drill press - [ ] (6) 1/2” wood bit - [ ] (10) 1/2” key WOOD Purgatory...") |
|||
| Line 2: | Line 2: | ||
TOOLS<BR> | TOOLS<BR> | ||
- | - 10’ tall scaffolding with platform and wheels<BR> | ||
- | - Drill press<BR> | ||
- | - (6) 1/2” wood bit<BR> | ||
- | - (10) 1/2” key<BR> | ||
WOOD Purgatory | WOOD Purgatory<BR> | ||
- | - (14) 2x10 x20’ kiln dried stud (main members and floor beams)<BR> | ||
- | - (32) 2x8 x16’ kiln dried stud (side member reinforcement and floor frame)<BR> | ||
- | - (15) 2x4 x10’ kiln dried stud (floor)<BR> | ||
- | - (40) 2x4 x8’ kiln dried stud (steps and wall frame)<BR> | ||
- | - (12) 2x6 x8’ kiln dried stud (steps)<BR> | ||
- | - (5) 48x96 3/4” plywood board (floor)<BR> | ||
- | - (50) 48x96 1/2” plywood board (walls)<BR> | ||
WOOD other octahedra | WOOD other octahedra<BR> | ||
- | - (350) 2x4 x96” kiln dried stud (24 8’ OH + 7 4’ OH)<BR> | ||
- | - (5) 2x4 x192” kiln dried stud (spire)<BR> | ||
HARDWARE Purgatory | HARDWARE Purgatory<BR> | ||
- | - (6) 20’ OH Simas Connector<BR> | ||
- | - (4) Simas con. add-on for equator cable guide and double ground anchor cable<BR> | ||
- | - (10) metal plates to connect Purgatory floor beams to 20’ OH (or use wood (1/2” ply triangles?) instead. TBD by engineer)<BR> | ||
- | - (3) U carpentry metal connector for Purgatory 2x10 floor beam cross<BR> | ||
- | - (100) 1/2 in. 4” long bolt<BR> | ||
- | - (12) 1/2 in. 8” long bolt (to anchor steel U for Ark steel cables to 2x10 studs)<BR> | ||
- | - (100) 1/2 in. 5 1/2” or 6” bolt (to connect 2x8 to 2x10 studs<BR> | ||
- | - (200) 1/2 in. Washer<BR> | ||
- | - (200) 1/2 in. Nut<BR> | ||
- | - (320’) 1/4 in. Steel cable (equator loop, floor loop, 8 ground anchors)<BR> | ||
- | - (100) 1/4 in. Cable connector<BR> | ||
- | - (50) 1/4 in. Cable loop protector<BR> | ||
- | - (15) 1/4 in. Cable tensor<BR> | ||
HARDWARE Ark | HARDWARE Ark<BR> | ||
- | - (TBD) 1/4” steel cable<BR> | ||
- | - (8) 1/4” pulley (connects Ark’s D rings to steel cable)<BR> | ||
- | - (28) 1/4 in. Cable connector<BR> | ||
- | - (15) 1/4 in. Cable loop protector<BR> | ||
- | - (8) 1/4 in. Cable tensor<BR> | ||
Revision as of 22:54, 23 June 2019
TOBRIT Shopping List
TOOLS
- 10’ tall scaffolding with platform and wheels
- Drill press
- (6) 1/2” wood bit
- (10) 1/2” key
WOOD Purgatory
- (14) 2x10 x20’ kiln dried stud (main members and floor beams)
- (32) 2x8 x16’ kiln dried stud (side member reinforcement and floor frame)
- (15) 2x4 x10’ kiln dried stud (floor)
- (40) 2x4 x8’ kiln dried stud (steps and wall frame)
- (12) 2x6 x8’ kiln dried stud (steps)
- (5) 48x96 3/4” plywood board (floor)
- (50) 48x96 1/2” plywood board (walls)
WOOD other octahedra
- (350) 2x4 x96” kiln dried stud (24 8’ OH + 7 4’ OH)
- (5) 2x4 x192” kiln dried stud (spire)
HARDWARE Purgatory
- (6) 20’ OH Simas Connector
- (4) Simas con. add-on for equator cable guide and double ground anchor cable
- (10) metal plates to connect Purgatory floor beams to 20’ OH (or use wood (1/2” ply triangles?) instead. TBD by engineer)
- (3) U carpentry metal connector for Purgatory 2x10 floor beam cross
- (100) 1/2 in. 4” long bolt
- (12) 1/2 in. 8” long bolt (to anchor steel U for Ark steel cables to 2x10 studs)
- (100) 1/2 in. 5 1/2” or 6” bolt (to connect 2x8 to 2x10 studs
- (200) 1/2 in. Washer
- (200) 1/2 in. Nut
- (320’) 1/4 in. Steel cable (equator loop, floor loop, 8 ground anchors)
- (100) 1/4 in. Cable connector
- (50) 1/4 in. Cable loop protector
- (15) 1/4 in. Cable tensor
HARDWARE Ark
- (TBD) 1/4” steel cable
- (8) 1/4” pulley (connects Ark’s D rings to steel cable)
- (28) 1/4 in. Cable connector
- (15) 1/4 in. Cable loop protector
- (8) 1/4 in. Cable tensor
