Difference between revisions of "Geodesic Temple"

From Disorient wiki
Jump to: navigation, search
Line 136: Line 136:
Assembly Leads: Ria R.,  Markus H. (Pinky) <!--kusso@mac.com--><BR>
Assembly Leads: Ria R.,  Markus H. (Pinky) <!--kusso@mac.com--><BR>
Platform: Lowroad<BR>
Platform: Lowroad<BR>
Lights ([[Solpix|Solpix]]): The Eye, Matt M.<BR>
Lights ([[Solpix|Solpix]]): The Eye, Matt M.<BR>
Lights install: Gabe<BR>
Lights install: Gabe<BR>

Revision as of 10:09, 9 July 2018

A sculpture by Disorient.
http://geodesictemple.com Facebook info@geodesictemple.com

OVERVIEW

GeoTem04pers02.jpg

Geodesic Temple is an expression of the Disorient philosophy: individual cells work together to create the ever-evolving landscape of life. As such, Disorient is inspired by the biological model. It is an art-centered, inspirational and nourishing collective that feeds on positive energy. It is open source and creates systems that can be taken apart by others and from which new systems can be developed.

Geodesic Temple is a modular system that uses the octahedron as a building block to create self-supporting structures. The octahedron is one of the five platonic solids. It has been used through the ages in sacred geometry and spiritual architecture. According to various traditions, each of the five platonic solids carries special teachings. The octahedron, also known as “the seed of life,” is symbolic of the union of heaven and earth, which exists within each of us. It also represents the Heart Chakra, serving as an expression of self-love and compassion. The octahedron is connected with the element of Air, consciousness, the breath of life, and new beginnings.

From this rich symbolic basis, Geodesic Temple derives a special power to enable profound personal realizations and transformative collective experiences. From a distance, the Temple seems complex, but as the viewer comes closer, she encounters a fundamental shift of awareness upon discovering the simplicity of the components and the logic of the structure. This shift of awareness challenges expectations, opening the heart and mind to new possibilities.

PHYSICAL DESCRIPTION

Geodesic Temple is a meta-modular, self-supporting, burnable structure made of a series of octahedra, a regular polyhedron with 8 identical equilateral triangular faces which is also a geodesic volume and a platonic solid. The octahedron is used as the structural building block to create self-supporting architectures to which skins, lights, facades, etc. can be added. In that sense, Geodesic Temple is about transparency and truth. Octahedra usually have similar sizes and are made of identical studs.

Modular

Modularity is one of the core principles of Disorient as expressed in the Disorient Model. Geodesic Temple is a meta-modular (modules made of modules) structure based on a single module, a octahedron.

Economy

Geodesic Temple is economical because of the inherent strength of triangles. It takes less material to build a self-supporting structure with octahedra than it would using orthogonal building blocks since triangles, being inherently triangulated, are stronger than rectangles. Geodesic Temple is visually and physically light for its size. It is ethereal.

Skin

Sides of octahedra can be partially or completely skinned. Skinning the structure with plywood or fabric provides additional shade and but add wind resistance.

Reuse

As an art collective, Disorient has developed a decentralized approach to art making supported by a rich vocabulary of modules. The octahedra of Geodesic Temple are part of Disorient's visual vocabulary and are often reused and reconfigured to create new versions of Geodesic Temple. You can see examples of several structure configurations based on the same octahedron in the Temple Library below.

Safety

Geodesic Temple should not be climbed.

CONNECTORS

Geodesic Temple uses metal connectors to assemble wooden studs into octahedra and connect octahedra together: the Simas connector and the Lowroad connector respectively, both named after their designers.

GeoTem04 PDF Spring2011 02.jpg

Simas Connector - connects 2x4 studs into octahedra

Version 1.0 (Mars 2011) - Simas Connector 1.0 is made of three 1/16" steel plates welded together. Two Simas Connectors are needed at each apex of the Octahedron (See pictures below). Holes receive 1/4"x2" bolts.
Simas-Connector01.jpg Simas-Connector02.jpg Simas-Connector03.jpg Simas-Connector04.jpg Simas-Connector05.jpg
SimasConnector10-10.jpg SimasConnector10-01.jpg SimasConnector10-02.jpg SimasConnector10-08.jpg SimasConnector10-09.jpg SimasConnector10-03.jpg SimasConnector10-04.jpg SimasConnector10-05.jpg SimasConnector10-06.jpg SimasConnector10-07.jpg
SimasConnector-Sheet-Layout.gif

Version 1.1 (April 2011) - Same as 1.0 plus 45 degree reinforcement bar on the side, between the plates.
SimasConnector11-01.jpg

Version 2.0 (May 2011) - Based on previous versions. Increased steel thickness to 1/8".

Version 3.0 (Dec 2015) - Small changes and additional plates on the Simas connector allow for metal-to-metal connection between octahedra. The Lowroad connectors are no longer needed. File:SimasConnector20151204.skp animation
SimasConnector20151204.1.jpg SimasConnector20151204.2.jpg SimasConnector20151204.3.jpg SimasConnector20151204.4.jpg

Lowroad Connector - connects octahedra together

Version Alpha (April 2011): GeoTemAlpha was assembled using off the shelf metal plates screwed into the 2x4 studs.
Version 1.0 (May 2011) Lowroad Connector 1.0 is made of one 1/8" steel plate bent in two places. Holes receive 1/4"x2" bolts.
LowroadConnector10-01.jpg LowroadConnector10-02.jpg LowroadConnector10-03.jpg LowroadConnector10-04.jpg LowroadConnector10-05.jpg LowroadConnector10-06.jpg

STUDS

Wood

Geodesic Temple uses basic 2x4 construction wooden studs widely available in United States. Although they are called 2x4, their section is actually 1.5"x3.5". The connectors are designed to work with those dimensions.

Geodesic Temple most often uses 8 ft. long 2x4 studs but other lengths can work too. Sarcophagus (Dubai 2016), for instance, was built with 4 meter long 2x4 studs. Following our modular stance, the 12 wooden studs necessary to create an octahedron are all identical and interchangeable BUT they are directional which means that the holes to secure the Simas connector to the stud are not placed on the same location on both ends. To that end we use a jig to cut and drill every stud.

For special cases, wooden studs can be reinforced or replaced with other material such as engineered wood or metal as long as the dimensions of the stud remains 1.5"x3.5" at the extremities that meet the Simas connectors. Warning: if dimensions of the section of the studs where two octahedra meet are larger than 1.5"x3.5" the connectors might not fit.

Aluminum

Version 0.1 (20180221)
This version integrates stud, connectors (Simas and Lowroad) and lights into a single aluminum object. Several of these objects can link to each other to manifest octahedra and larger structures. Separate connectors are no longer needed to create a GeoTem structure.

3D model: GeoTemAluminumMember20180221.skp
GeoTemAluminumMember20180221.1.jpg GeoTemAluminumMember20180221.2.jpg GeoTemAluminumMember20180221.3.jpg GeoTemAluminumMember20180221.6.jpg

HARDWARE (BOLTS, WASHERS, NUTS)

Holes on both Simas and Lowroad connectors are designed to receive 0.25" bolts. Therefore there is only one size hardware used throughout the system: 0.25"x2.5" bolt/washer/nut. Shorter 0.25"x2" can work with optimum alignments but 0.25"x2.5" gives comfortable wiggle-room and simplifies assembly especially in difficult situations. Longer bolts of the same diameter can work but are not recommended.

96 bolt/washer/nut units are needed to assemble one octahedron.
24 bolt/washer/nut units are needed to connect two octahedra together.

ASSEMBLY

Different cells are dedicated to specific parts of the assembly process. The repetitive aspect of this construction allows members of each cell to become experts at the specific tasks performed which translates into more accurate fabrication, faster assembly and safer structure.

The different steps of on-site assembly are performed in parallel by several cells.

Octahedron Assembly

Create octahedra by connecting 2x4s together using Simas Connectors. The ends of the wooden studs are precut at an angle to fit tightly together using the Simas Connector. Each of the 12 studs that make an octahedron must connect to one Simas connector at one end and two Simas connectors at the other end. Repeat the process until the octahedron is complete. There is an unusual and fascinating symmetry involved in octahedron assembly the understanding of which can be demanding (and eventually deeply satisfying--welcome to sacred geometry) to the new builder. If this symmetry is not respected the octahedron will be difficult to complete and the result will be asymmetrical which will lead to problems in the next step (connecting octahedra together). Members of this cell are responsible for quality control of each octahedron. Each wood stud is carefully assessed for strength and durability. Studs that are warped, split and/or have knots are set aside and used as emergency replacements only if necessary. After each octahedron is assembled two members of the cell verify that each nut is tight on its bolt. A total of 96 points must be verified one by one for the octahedron to be completed and safe. This step is crucial as a lack of rigidity in one octahedron could compromise the entire structure.

Connecting Octahedra together

Temples are always different and each require a careful assessment of the geometry to design an appropriate assembly sequence. Only one person, usually the Director, should be in charge of defining the assembly sequence which is broken down into several steps. The first step is always to connect two or more octahedra together using the Lowroad Connector if pre v3.0 Simas Connectors were used for assembling the octahedra. GeoTem04 for example, requires two "arches" assembled separately on the ground. Arch "A" is made of 6 octahedra--5 for the arch plus one on top of the arch. Arch "B" is composed of 7 octahedra--5 for the arch plus two on top of the arch, the top octahedron being the top of GeoTem04. Again, this is just one example.

The Click

The last step of GeoTem04 assembly--to continue with this example--is known as the Click. Connecting arch A and arch B together using the Lowroad Connector. It requires 13 people and a 10-12' tall box truck. The top of the box truck is prepped with a platform made of 3 sheets of 4'x8' 3/4" plywood screwed together to two 2x4x10' studs and secured to the box truck with ratchet straps. This platform allows a specialized cell to work on top of the truck to do the final connect. All four legs of the two arches need to be on the same plane, preferably horizontal, which means that the ground needs to be measured and possibly dug in some locations for the Click to happen smoothly.

Most Geodesic Temples require a Click step, meaning that parts of the final structure are assembled separately, then those parts are connected together. Different Geodesic Temples require different Clicks. Some Clicks require heavy machinery. The Click of Tetrax for instance requires a crane.


TEMPLE LIBRARY

Temple of Incompletion (TOI) (Burning Man 2018)

The Temple of Incompletion is an evolution of the Temple of Forbidden Symmetry, Geodesic Temple's installation at Burning Man 2017.

A symmetrical structure made of 5 identical columns, each made of 5 identical octahedra, each made of 12 identical wooden studs and 24 identical "Simas" metal connectors stands in the desert simultaneously referencing sculpture and architecture.

The only rupture in this seemingly perfect harmony is the open wedge on one side of the structure which forbids the closing of the top and bottom rings and impacts the radial distribution of the columns. When face-connecting 5 octahedra in a circular fashion on a plane, the small wedge that remains between the 1st and 5th octahedra makes it impossible to close the loop. This wedge is a mathematical enigma that has eluded mathematicians for millennia. It is an example of forbidden symmetry.

The Temple of Incompletion is an ode to the unsolved problems and the unanswered questions, it is a reminder that it is important for some things to remain unfinished, incomplete, open.

INSIDE:
TOI has one pentagonal central platform and five square peripheral platforms all made of plywood onto which burners are invited to recline. The central platform makes a great stage for different kinds of performance (dance, theater, fire spinning, etc.). A square of sand-colored material above each square platform provides shade.

LIGHT:
At night one hundred and fifty individual white solar lights (Solpix) located near the nodes on the structure create a scintillating effect. Each Solpix is equipped with solar panel, battery, light sensor and 6 LEDs pointing in 2 directions. Each Solpix works independently. There is no physical connection between Solpixes and no external power is required to run the lights.

BURN:
TOI will be burned on Friday after sunset.
Burn plan:
- Build 3 "log cabin" style triangle fires under corners of the structure/platforms
- Smaller burn structures on first level, inside structure:
If we arrange some of the 2x4s raised above the base fires, either on platforms or around structural sides in a conical hourglass structures we can put smaller fuel in the vertexes to help the fire burn towards the higher platforms.
Drilling a few holes in the plywood will allow airflow for heat/fire to travel
Ropes will be used to help fire travel and provide additional fuel/heat at structural points (natural fiber) pending approval from FAST team
- Ropes will be fueled using diesel gas, wicked upwards into the structure
- Ropes from the top down through both platforms into the base fire to basically run the fire straight up, creating a fire chimney
- Rope will be wrapped beams to move the fire vertically
- Rope will be wrapped around intersections to add fuel and heat, ideally to weaken the structure in a targeted fashion
- To be sourced on west coast:
3-5 sawdust fireballs will ignite the burn remotely using e-matches
5 gallon plastic bucket with gunpowder charge, filled with sawdust, tamped down
Sawdust is ejected and ignited by gunpowder charge
Burns very hot/fast as sawdust is aerosolized

TEMPLARS:
Director/Exec. Producer: The Eye of Disorient
Producers: Ria R., Lowroad
BM Artery Liaison: Ria R.
Engineer Liaison: Lowroad
Assembly Leads: Ria R., Markus H. (Pinky)
Platform: Lowroad

Lights (Solpix): The Eye, Matt M.
Lights install: Gabe
Lights (plan B): LED pars (Vadim)

Burn Lead: Yahel B.D.
Burn Support: Johnny B.
Perimeter Leads: Rion Fish & Christine Carey
Fire Safety Liaison : Sasha Kakasha
LNT Lead : Ivan F.

Crew: Canaan F.R. (Nitro) , Simas B. , Marcus S. (Moses) , Randy P. (Thumper) , Yarrow D. , Anya O. (Aniutka) , Bobby. (Jizzy) , Brandon. (Bshullz) , Ian S. (Epic) , Pat S. , Asaf N. , Ray B. , Arwen B. , Nali S. , Sam M. (Crazybaby) , Marco L. , Deva. (Devastation) , Andre R. , Artem P. , Ahmad S. , John S.


NOTES:
Overall dimensions: 35' (Width) x 35' (Length) x 32' (Height)
Components: (25) octahedra
Weight: 6520 lbs (25 OH (kiln-dried 2x4x8 plus Simas connectors) x 160lbs = 4000 lbs) + (30 5/8” plywood x 84lbs = 2520 lbs)
Assembly sequence: Top-down (similar to geodesic dome) using crane (see assembly sequence drawing)
3D model: TempleOfIncompletion20180119.skp
Animation: TBA
Reference: Forbidden crystal symmetry in mathematics and architecture

TempleOfIncompletion20180608.1.jpg TempleOfIncompletion20180608.2.jpg TempleOfIncompletion20180608.assemblysequence.jpg
TempleOfIncompletion20180608.wideangle.1bit.4000px.jpg TempleOfIncompletion20180608.wideangle2.1bit.4000px.jpg TempleOfIncompletion20180608.elev.1bit.4000px.jpg TempleOfIncompletion20180608.elev2.1bit.4000px.jpg


The Eighth (Disorient Country Club 2018)


Temple of Forbidden Symmetry (TFS) (Burning Man 2017)

A symmetrical structure made of 5 identical columns, each made of 4 identical octahedra, each made of 12 identical wooden studs and 24 identical "Simas" metal connectors stands in the desert simultaneously referencing sculpture and ritual architecture.

The only rupture in this seemingly perfect harmony is the open wedge at the top of the structure which forbids the closing of the highest ring and impacts the radial distribution of the columns. When face-connecting 5 octahedra in a circular fashion on a plane, the small wedge that remains between the 1st and 5th octahedra makes it impossible to close the loop. This wedge is a mathematical enigma that has eluded mathematicians for millennia. It is an example of forbidden symmetry.

The Temple of Forbidden Symmetry is an ode to the unsolved problems and the unanswered questions, it is a reminder that it is important for some things to remain unfinished, imperfect, open.

TEMPLARS:
Director: The Eye
Producers: The Eye, Justin D.
Lights and Electronics design: Justin D.
Assembly: Ria, Justin, Raffi, Pat, Thumper, Nali, Jane, Space Hippy, Connor, Arturo, Kevin, Moses, Jared, Andy

NOTES:
Overall dimensions: 35' (Width) x 35' (Length) x 26' (Height)
Components: (20) octahedra, uses wood and connectors from Geodesic Temple container on playa
Assembly sequence: using crane (see assembly sequence drawing below)
3D model: TempleOfForbiddenSymmetry_BM2017.skp
Animation: TempleOfForbiddenSymmetry20170609.mp4
Reference: Forbidden crystal symmetry in mathematics and architecture

VIDEOS:
1 2 3 4 5 6 7 8

IMG 9627.JPG IMG 9749.JPG
IMG 9494.JPG IMG 9495.JPG IMG 9497.JPG IMG 9523.JPG IMG 9525.JPG IMG 9611.JPG IMG 9613.JPG IMG 9624.JPG IMG 9625.JPG IMG 9632.JPG IMG 9634.JPG IMG 9669.JPG IMG 9736.JPG IMG 9737.JPG IMG 9739.JPG IMG 9742.JPG IMG 9749.JPG IMG 9752.JPG IMG 9753.JPG IMG 9764.JPG
TempleOfForbiddenSymmetry20170609.1.jpg TempleOfForbiddenSymmetry20170609.4.jpg TempleOfForbiddenSymmetry20170609.plan.jpg TempleOfForbiddenSymmetry20170609.assemblysequence.jpg TempleOfForbiddenSymmetryNamingConvention.png 5OHs2012.jpg


GeoTem Art Car

GeoTemArtCar2017.1.jpg GeoTemArtCar2017.3.jpg GeoTemArtCar2017.4.jpg


The Seventh aka ETH (Country Club 2017)

TEMPLARS:
Director, Producer, Design, 3D model: The Eye
Assembly: Lowroad, Slavik K., The Eye
Lighting: Vadim
Burn: Lowroad, Jason G., Volume

GeoTemTheSeventhCC2017.1.jpg GeoTemTheSeventhCC2017.5.jpg GeoTemTheSeventhCC2017.3.jpg GeoTemTheSeventhCC2017.4.jpg GeoTemTheSeventhCC2017.2.jpg GeoTem TheSeventh CC2017.4.jpg


Crypto (Bedouin Tech 2017)

TEMPLARS:
Director, Design, 3D model: The Eye
Producers: The Eye, Firas
Connector advisors: Simas B., Lowroad
LED / Programming: Warren, Jacob J., Paul
Wood: Carlos, Ivan, Zander, Orwa, Azmi, Omar, Ameed, Eli
Tarp: Zarina Logistics, Coordination, Fundraising: Firas, Warren

GeoTem Crypto BT17 Dubai.1.jpg GeoTem Crypto BT17 Dubai.2.jpg GeoTem Crypto BT17 Dubai.3.jpg
GeodesicTempleBedouinTechDubai20170125.5.jpg GeodesicTempleBedouinTechDubai20170125.3.1.jpg GeodesicTempleBedouinTechDubai20170125.elev1.jpg GeodesicTempleBedouinTechDubai20170125.plan.jpg


Tetrax (Burning Man 2016)

COMPONENTS:
(13) octahedra

NOTES:
- Uses wood and connectors from GAX.
- Assembly/disassembly required DPW crane for 4 hours
- Disassembly required DPW crane for 2 hours

TEMPLARS:
Director: The Eye
Producers: The Eye, Trammel H.
Assembly Lead: Randy P., Jacob Markus H.

GeoTemTetraxBM2016.jpg GeoTemTetraxBM2017.1.jpg

TetraSymmetry20160520.jpg GeoTemTetraxBM2017.2.jpg GeoTemTetraxBM2017.3.jpg GeoTemTetraxBM2017.4.jpg


The Sixth (Country Club 2016)

Dimensions: 16' wide x 24' high x 16' deep

NOTES:
- First time using OHs of different sizes together in a GeoTem.

GeoTem TheSixth CC2016.1.jpg GeoTem TheSixth CC2016.2.jpg


Sarcophagus (Bedouin Tech 2016)

3D model: File:GeodesicTempleBedouinTechDubai2016.skp
Dimensions: 1100cm wide x 680cm high x 1070cm deep

COMPONENTS (2 OH contingency included):
(8) octahedra
(96) 400cm long 2x4 studs (sourced in Dubai)
(96) Simas connectors (made in Dubai)
(36) Lowroad connectors (made in Dubai)
(888) 0.25" x 2.5" bolt/washer/nut combo
(96) 380cm white LED strips with power supply and controller

NOTES:
- Sarcophagus is the first GeoTem to use 400cm long wooden studs (previous GeoTems used 8ft. long studs). This means that each OH will require ladders to be assembled. We will need two 300cm ladders.
- Final assembly will require work done at 680cm high so we might need a small cherrypicker for construction and break-down

TEMPLARS:
Director, Design, 3D model: The Eye
Producers: The Eye, Firas
Connector advisors: Simas B., Lowroad
LED / Programming: Warren, Ivan, Justin
Wood: Guillaume, Freeman, Wees, D'Arcy, Ramzi
Paint: Talal, Rawi, Salina
Logistics, Coordination, Fundraising: Firas, Warren

GeoTemSarcophagusDubai2016.5.jpg
GeoTemSarcophagusDubai2016.9.jpg GeoTemSarcophagusDubai2016.2.jpg GeoTemSarcophagusDubai2016.3.jpg GeoTemSarcophagusDubai2016.4.jpg GeoTemSarcophagusDubai2016.6.jpg GeoTemSarcophagusDubai2016.7.jpg GeoTemSarcophagusDubai2016.8.jpg GeoTemSarcophagusDubai2016.1.jpg GeodesicTempleBedouinTechDubai2016.1.jpg GeodesicTempleBedouinTechDubai2016.2.jpg GeodesicTempleBedouinTechDubai2016.3.jpg GeodesicTempleBedouinTechDubai2016.4.jpg


Asterix (Burning Man 2015)

3D model: File:GeoTemAsterix2015.skp

COMPONENTS:
(9) octahedra

NOTES:
Uses wood and connectors from GAX.

TEMPLARS:
Director: The Eye
Producers: The Eye, Justin D.
Electronics design: Max Henstell, Matt Mets
Assembly: Lowroad, Freeman, Jasmine Y, Jared Klett, Brian O'Clair

GeoTemAsterixBM2015.8.jpg

GeoTemAsterixBM2015.2.jpg GeoTemAsterixBM2015.3.jpg GeoTemAsterixBM2015.4.jpg GeoTemAsterixBM2015.5.jpg GeoTemAsterixBM2015.6.jpg GeoTemAsterixBM2015.7.jpg GeoTemAsterixBM2015.9.jpg GeoTemAsterixBM2015.10.jpg GeoTem2015-03.4.jpg GeoTem2015-04.4.jpg GeoTemAsterixBM2015.1.jpg


The Fifth (Country Club 2015)

by The Eye and Ninja
3D model: File:GeoTemCC2015.skp

GeoTemCC2015.3.jpg
GeoTemCC2015.1.jpg GeoTemCC2015.2.jpg GeoTem2015-CC03.1.jpg GeoTem2015-CC03.1.1.jpg GeoTem2015-02-1.4.jpg GeoTem2015-02-2.4.jpg

Material and tools:
- 75x 2x4x8' wood studs
- 4x 2x4x10' wood studs
- 64x Simas Connectors
- 25x Lowroad Connectors
- 9x Triangular Tarps. provide shade during the day. To be removed before burn.
- 100x 6" ball bungees
- 2x Screw gun with bits
- Ryobi charger
- miter saw
- big box 1 5/8" screws
- big box 2 1/2" (better) OR 2" screws
- small washers for 1 5/8" screws
- 2x white folding table


The Fourth (Country Club 2014)

GeoTem at Country Club
by the Soviet Block
GeoTem2014CC01.jpg
GeoTem2014CC02.jpg GeoTem2014CCburn.jpg


The Third (Country Club 2013)

by Lowroad and The Eye
CC2013Effigy s.jpg CC2013 TheThird01.jpg CC2013 TheThird02.jpg


GeoTem08

GeoTem on the Dex

GeoTem07

GeoTem06 on its side
GeoTem07elev01.jpg GeoTem07elev02.jpg GeoTem07elev03.jpg GeoTem07plan.jpg
Height: 61' Length: 116' Width: 82'. 24 studs x ?? octahedra = ?? 2x4x8' studs.

GeoTem06

Iteration of GeoTem04 and GeoTem05
GeoTem06pers01.jpg GeoTem06pers02.jpg GeoTem06pers07.jpg GeoTem06pers06.jpg
GeoTem06isometry01.jpg GeoTem06isometry02.jpg GeoTem06pers03.jpg GeoTem06plan.jpg
Height: 64' Length: 82' Width: 82'. 24 studs x 144 octahedra = 1728 2x4x8' studs.

GeoTem05

Iteration of GeoTem04
GeoTem05pers01.jpg GeoTem05pers02.jpg GeoTem05pers05.jpg GeoTem05plan.jpg
Height: 52' Length: 57' Width: 57'. 24 studs x 55 octahedra = 660 2x4x8' studs.

GAX (GeoTem04 Arena Hexa) (Burning Man 2011)

Burning Man Proposal
360 photo of GAX
Setup and breakdown (unedited time-lapse by Matt P.)
GAX 05.jpg GeodesicTempleBM2011.jpg GAX 01.jpg GAX 02.jpg GAX 03.jpg GAX 04.jpg
Photos by James Addison

GeoTem04 ArenaH 01.jpg GeoTem04 ArenaH 02.jpg GeoTem04 ArenaH plan.jpg GAX lights01 plan01.jpg GAX lights01 pers01.jpg GAX lights01 pers02.jpg GAX lights01 pers03.jpg
Height: 32' Length: 110' Width: 95'. 12 studs x 65 octahedra = 780 2x4x8' studs.
3D model of GAX: File:GAX.skp

GeoTem04 Arena Square

GeoTem04 ArenaS 01.jpg GeoTem04 ArenaS 02.jpg GeoTem04 ArenaS plan.jpg
Height: 32' Length: 83' Width: 83'. 12 studs x 52 octahedra = 624 2x4x8' studs.

GeoTem04a

GeoTem04apers01.jpg GeoTem04apers02.jpg GeoTem04aisom01.jpg GeoTem04aplan.jpg
Height: 32' Length: 33' Width: 33'. 24 studs x 21 octahedra = 480 2x4x8' studs.

GeoTem04

GeoTem04pers01.jpg GeoTem04pers03.jpg GeoTem04pers02.jpg GeoTem04pers04.jpg GeoTem04plan.jpg
Height: 32' Length: 33' Width: 33' Weight: ~2000 Lbs (including metal connectors and hardware). 12 studs x 13 octahedra = 156 2x4x8' studs.
Line drawing 3D model of GeoTem04: File:GeoTem04 line.skp

Figment NYC 2011

Time-lapse
GeoTem04 Figment2011 01.jpg GeoTem04 Figment2011 02.jpg GeoTem04 Figment2011 03.jpg
GeoTem04 Figment2011 04.jpg GeoTem04 Figment2011 05.jpg GeoTem04 Figment2011 06.jpg

Playa Del Fuego Spring 2011 Odessa, DE

GeoTem04 PDF Spring2011 02.jpg GeoTem04 PDF Spring2011 03.jpg GeoTem04 PDF Spring2011 04.jpg
GeoTem04 PDF Spring2011 05.jpg GeoTem04 PDF Spring2011 06.jpg GeoTem04 PDF Spring2011 07.jpg

Dead load analysis

GeoTem04 Dead Load 01.jpg GeoTem04 Dead Load 02.jpg GeoTem04-Study 1-Results-Stress1.analysis.jpg

Dead load+Wind analysis

GeoTem04-Failure-Diag01.png GeoTem04-Failure-Diag02.png GeoTem04-Failure-Diag03.png
GeoTem04 Dead+Wind 01.jpg GeoTem04 Dead+Wind 02.jpg

Assembly sequence

1. Connect 5 OH to create big C #1
2. Connect 5 OH to create big C #2
3. Add 1 OH to big C #1 to create Arch #1
4. Add 2 OH to big C #2 to create Arch #2
5. Raise Arch # 1 and #2 and connect them together. Use box truck as elevated platform.

GeoTem04 single no hardware truck.jpg GeoTem04 PDF Spring2011 01.jpg

GeoTemAlpha (Disorient presents: GLAMTECH)

GeoTemAlpha01 pers03.jpg GeoTemAlpha01 pers05.jpg GeoTemAlpha01 pers04.jpg
GeoTemAlpha GlamTech01.jpg
GeoTemAlpha is the first Geodesic Temple to be built. It is a proof of concept made of seven octahedra that form approximately half of GeoTem04. It uses the Lowroad Single Stud Cord design. 2x4 studs are assembled into octahedra using the Simas Connector version 1. It is painted fluorescent pink. Produced by Preston and Jay.
Height: 15' Length: 27' Width: 30'. 12 studs x 7 octahedra = 84 2x4x8' studs.

GeoTem03

GeoTem03pers01.jpg GeoTem03pers02.jpg GeoTem03pers03.jpg GeoTem03plan.jpg
Height: 36 feet. 24 studs x 57 octahedra = 1368 2x4x8' studs.

GeoTem 01, 02

Geodesic temple 2011 03.jpg Geodesic temple 2011 04.jpg <videoflash type="youtube">XbSmkNHScLg|330|228</videoflash>

Height: 91 feet. All icosahedra are the same size.

3D files

GeoTem03, 04, 05, 06: Media:GeoTemOcta01.skp‎
GeoTem01, 02: Media:GeoTemIco.skp‎

Geodesic-temple-logo.jpg Geodesic-temple-logo-inverted.jpg

Geodesic-temple-logo halftones 01.jpg Geodesic-temple-logo halftones 03.jpg

Geodesic-temple-logo halftones 04.jpg Geodesic-temple-logo halftones 02.jpg

Geodesic-temple-logo halftones05.jpg Geodesic-temple-logo notext.jpg

Notes

- Camp frontage and Dex transformation uses same polyhedron as Geodesic Temple.

References:
La Fievre d'Urbicande
From Victoria's inspirations and JoeChe on FB
From vic 01.jpeg From vic 02.jpeg Joeche diamond.jpeg