Difference between revisions of "Sound"

From Disorient wiki
Jump to: navigation, search
Line 32: Line 32:


====Cables====
====Cables====
[[Media:SoundSystem_cabling_diagram_v.1.0.pdf|Cabling diagram]]
[[Media:SoundSystem_cabling_diagram_v.1.1.pdf|Cabling diagram]]
=====Patch cables=====
=====Patch cables=====
* 2 x 5 XLRf-XLRm from XTA crossovers to amp channels (5-way on each side)
* 2 x 5 XLRf-XLRm from XTA crossovers to amp channels (5-way on each side)

Revision as of 22:54, 4 July 2007

Managed by Rumble, Seven and The Eye
Puddle discussion: Music and Events

We accept sound equipment donations.

Sound Systems

CROWN/CUSTOM

Bigsoundwideshot.jpg

Racks

IMG 7258.JPG Crown macrotech back.jpg

"Frogs"

4-way speakers (available now: 6/8) (45"h x 30"w x 18.5"d ~= 14.5 cu. ft.)


The enclosure has two Speakon NL8 8-pole panel connectors for daisy-chaining them. Each pair drives each of the components. Pair #1 is connected the low driver, 2 - Low-Mid (in parallel) , 3 - Hi-Mid, and 4 to the tweeter pair (in parallel)

Frog #31 has a dead woofer.

Subs

(available now: 5/16) (35.5"h x 25.5"w x 24"d ~= 12.6 cu.ft)

The enclosure has two Speakon NL8 8-pole panel connectors for daisy-chaining them. Only pair #1 is connected.

Cables

Cabling diagram

Patch cables
  • 2 x 5 XLRf-XLRm from XTA crossovers to amp channels (5-way on each side)
  • 2 x 7 TRS-XLRm to daisy-chain amps (4 for a second set of Frog amps, and 3 for a total of 4 sub amps on each side)
NL8 Speakon cables
  • To Frogs - each component (Low, LoMid, HiMid, High) is wired to a different NL8 pair.
    • 4 NL8 cables terminating with 4 dual-banana pairs on the amp side.
    • 4 NL8 Speakon-Speakon patch cables to daisy-chain 2 frogs per amp-set.
  • Subs - each sub is wired on one pair. 4 NL8 pairs will carry signal from 4 amps, and each group of subs will be wired to one of the pairs.
    • 2 NL8 cables terminating with 4 dual-banana pairs on the amp side.
    • 14 NL8 Speakon-Speakon patch cables to daisy chain 2 subs per amp-set.

TODO

  • Equipment testing (40% done)
  • Signal and power flow plan (50% done)
  • Equipment repair
  • Rex/Dex speaker mounting plan
  • NL8 speaker cable layout plan
  • NL8 speaker cable soldering party
  • Rack cooling solution
  • Find a PC laptop to run XTA Audiocore - the crossover configuration software
  • Load out to the container





MACKIE (amplified speakers)

Disorient sound.jpg

CREST/EAW

  • Crest Audio CA9 (power amps) (available now: 3/3) (23x22x24 = 7)
  • EAW MK5194 (500W speakers) (available now: 5/5) (20x16x30 = 5.56 total= 27.8)

total cubic feet for systems 2 and 3 = 77

DJ equipment



Mini D

Mini-D


Cable inventory

(Oct 13 2006)

XLR-XLR
long - 10

med - 13
short - 9

Speakon m - dual banana
1
Raw speaker cable 1 roll
XLR Y cable 1f->2m
2
1/4"m-XLRf
2+1 short
1/4"m-XLRm 1
1/4" TRS m - XLR m dual
1
1/4"m - 1/4"m
dual - 2 (in boxes)

single - 5

RCAm-RCAm
dual - 6

single - 3

1/4"m - RCAm dual
1
RCAm - XLRm
1
RCAm - XLRf 2
Mini stereo - dual RCAm
3
Mini mono - single
1
MIDI
3
VGA - BNC components 1
BNC-BNC
1



Adapters:

Speakon f - dual banan adapter
1
1/4" stereo splitter m-2f
1
XLRm-m gender changer
5
XLRf -1/4"m
1
RCA f-f gender changer
2




Power cables:

  • 20 standard grounded + 1 not grounded
  • Extension + 4-way splitter
  • Extension
  • Y cable


Mics:



We need:

  • list needed items here


TheBass Compressor2005.jpg
The Bass with some bass at Compressor 2005.