Difference between revisions of "CoSign"

From Disorient wiki
Jump to: navigation, search
Line 6: Line 6:


The letter "D" is composed of 54 pixels organized in clusters of 2x3 pixels. Those clusters are stackable for transportation and storage as shown in illustration.<BR>
The letter "D" is composed of 54 pixels organized in clusters of 2x3 pixels. Those clusters are stackable for transportation and storage as shown in illustration.<BR>
==CoSign ([[Country_Club#2022|Disorient Country Club 2022]])==
[[File:DisorientCollaborativeSign20191222.CCXback.jpg|400px]] [[File:DisorientCollaborativeSign20191222.CCXfront.jpg|400px]]<BR>
Scaffolding layout is adjusted depending on the size of scaffolding elements (ladders and crossbars) available.<BR>
Before [[Country_Club#2022|CCX]], the CoSign Cell organizes the wooden fabrication and electrical setup of CoSign pixels (mostly grouped in 2x3 modules). Each pixel is lit from the inside. The whole CoSign is sequenced.<BR>


==CoSign (Disorient [[Camp#2022|Camp]] at BM22)==
==CoSign (Disorient [[Camp#2022|Camp]] at BM22)==
Line 15: Line 22:


Once assembled, those pixels become the letter D. This single-letter Sign supported by pallet rack is part of the frontage of Disorient camp at BM22.<BR>
Once assembled, those pixels become the letter D. This single-letter Sign supported by pallet rack is part of the frontage of Disorient camp at BM22.<BR>
==CoSign ([[Country_Club#2022|Disorient Country Club 2022]])==
[[File:DisorientCollaborativeSign20191222.CCXback.jpg|400px]] [[File:DisorientCollaborativeSign20191222.CCXfront.jpg|400px]]<BR>
Scaffolding layout is adjusted depending on the size of scaffolding elements (ladders and crossbars) available.<BR>
Before [[Country_Club#2022|CCX]], the CoSign Cell organizes the wooden fabrication and electrical setup of CoSign pixels (mostly grouped in 2x3 modules). Each pixel is lit from the inside. The whole CoSign is sequenced.<BR>


==Lighting (spec'd by Vadim)==
==Lighting (spec'd by Vadim)==

Revision as of 00:41, 24 April 2022

A Collaborative Sign by Disorient 2022 campers
organized by the CoSign Cell
designed by The Eye in 2019

Our Collaborative Sign (CoSign) is made of clusters of wooden 3D pixels supported by a metal structure (pallet rack, scaffolding, etc.). Each pixel is about 30" wide x 30" tall x 8" deep.

The letter "D" is composed of 54 pixels organized in clusters of 2x3 pixels. Those clusters are stackable for transportation and storage as shown in illustration.

CoSign (Disorient Country Club 2022)

DisorientCollaborativeSign20191222.CCXback.jpg DisorientCollaborativeSign20191222.CCXfront.jpg
Scaffolding layout is adjusted depending on the size of scaffolding elements (ladders and crossbars) available.

Before CCX, the CoSign Cell organizes the wooden fabrication and electrical setup of CoSign pixels (mostly grouped in 2x3 modules). Each pixel is lit from the inside. The whole CoSign is sequenced.

CoSign (Disorient Camp at BM22)

File:DisorientCollaborativeSign20191222.skp

DisorientCollaborativeSign20191222.2.jpg DisorientCollaborativeSign20191222.3.jpg DisorientCollaborativeSign20191222.4.jpg

Campers invited to participate create a pornj object (2D or 3D) that fits into one pixel. That object is a visual and/or written description (sculpture, painting, collage, written words...) of their favorite Disorient memory. Some pixels might be used as dioramas for objects from the Disorient Museum.

Once assembled, those pixels become the letter D. This single-letter Sign supported by pallet rack is part of the frontage of Disorient camp at BM22.

Lighting (spec'd by Vadim)

There are 54 pixels. Correct?
Is this going to be out in playa or in camp?
What is the power situation?

Big generator

If this is near the big generator it’s really easy to do it with completely rentable gear.

DIMMER RENTAL
You rent this guy - it’s a 48x 2.4 kilowatt dimmer rack:
https://www.usedlighting.com/2008/etc-48-x-2k-sensor-rack-cem-
Then you add one of these:
https://www.usedlighting.com/47398/etc-sensor-12-x-2-4kw-dimmer-rack
It’s a 12 rack - so now you’re at 60 dimmers total

I gotta ask for a price quote. But renting the big dimmers likely less expensive than buying the small ones - but you can re use the small ones in the future.

CABLE TO BULB
Then you use this type of cable to go to the bulbs:
https://www.usedlighting.com/86/12-14-multi-cable-150- (750 USD)
https://www.usedlighting.com/14467/edison-break-out-6- (140 USD)

Small generator

If it’s gotta run off a 7k put-put genny it’s gonna to be done off dimmers that would likely have to be purchased. If you’re out in playa and you’re using a small generator with a photo cell and or timer you need the type of genny that can kick itself on under load

DIMMER PURCHASE (2,000 USD)
You have to buy 10 of these and use regular zip (lamp) cord and I would just get a spool and connectors and custom make it for length.
https://goknight.com/Chauvet-dj-dmx-4/

DATA CABLE
Oh you would also need a data cable to link the dimmers -So you would need 9’ of these - these we can buy new or used - also re-usable
https://www.usedlighting.com/13526/5-pin-dmx-cable-25-5-Pin

So with small genny - you gotta BUY the dimmers - that’s 2,000 USD then like 350 USD for the cable and 550 USD for the connectors and 300 USD for the bulbs and 175 USD for the sockets

SOCKET, BULB and CONNECTOR
And then you buy a porcelain socket that’s surface mountable, the bulb and the connector:
https://www.homedepot.com/p/Leviton-600-Watt-250-Volt-White-Outlet-Box-Lampholder-R50-49875-000/207106566
https://www.homedepot.com/p/Sunlite-60-Watt-Equivalent-A19-Dimmable-Filament-E26-Medium-Base-LED-Orange-Light-Bulbs-6-Pack-HD02270-3/312593793
https://www.homedepot.com/p/Leviton-15-Amp-125-Volt-3-Wire-Plug-Orange-R51-515PV-0OR/205165505

CONTROL SEQUENCE
Then we can use my console or whatever computer gadget you want to generate the DMX sequence for whatever length you want - I usually aim for 10 minutes and make it look nice
And we can use one of these to essentially be the VCR that played the DMX show back over and over and over again on a loop:
https://www.newlighting.com/32537/new-chauvet-dj-dmx-rt
This is a purchase and you have to buy a microSD card for it

PHOTO CELL
Finally, you out it in a timer or a photo cell so that it turns on at dusk. And turns off at daylight. Or your run it forever or if it’s in camp you just go turn it on:
https://www.aqlightinggroup.com/outdoor-lighting/landscape-accessories/timers-controllers/commercial-grade-photocell/
https://www.aqlightinggroup.com/outdoor-lighting/landscape-accessories/timers-controllers/multi-mode-astronomic-timer-yl-t120v/